KVM (Keyboard, Video and Monitor) Extender with 44.1 kHz digital stereo audio support for two computers up to 1,000 feet from rugged peripherals. KVM extender works over CAT5 UTP cable and supports video mode up to 1920 x 1200.

ADDERLink KVM Extender, Remote Installed in Daisy Monitor

Unit of Measure

Physical Dimension

Remote Height

N/A 1.00 in

Remote Width

N/A 2.94 in

Remote Depth

N/A 6.44 in

Remote Weight

N/A 1 lb

Note for Remote Dimensions

N/A In model 5518, remote system is internal within the monitor enclosure, purchased separately.

Environmental

Operating Non-Condensing Relative Humidity

N/A 10 to 85 %

Storage Non-Condensing Relative Humidity

N/A 10 to 90 %

Operating Temperature

N/A 0 to 40 ºC32 to 104 ºF

Storage Temperature

N/A -20 to 50 ºC-4 to 122 ºF

Electrical

Alternating Current (AC) Voltage

N/A 100 to 120 V

Frequency

N/A 50 to 60 Hz

Maximum Current

N/A 0.5 A

Supply Source

N/A 24 VAC Wall Transformer (Included)

Signals Support

Keyboard

N/A USB
Pointing Device1 N/A USB

Video (Non-Interlaced Only)

N/A 1280 x 1024 (Up to 980 ft) 1600 x 1280 (Up to 650 ft) 1920 x 1200 (Up to 160 ft)

Note for Signals Support

N/A Does not support Touchscreen interface.

Connections

From Local Computer

N/A Keyboard - USB Pointing Device - USB VGA - HD15 Video

To Remote Peripherals

N/A

Remote 5559
VGA - HD15 Video
Keyboard - USB
Pointing Device - USB

Remote 5558
As supplied on remote enclosure

Options

Accessories

N/A 9565 - 50 ft Prefab Category 5 Cable 9566 - 100 ft Prefab Category 5 Cable 9567 - 150 ft Prefab Category 5 Cable 9568 - 200 ft Prefab Category 5 Cable 9569 - 250 ft Prefab Category 5 Cable 9570 - 300 ft Prefab Category 5 Cable 9571 - 350 ft Prefab Category 5 Cable 9572 - 400 ft Prefab Category 5 Cable 9575 - 1000 ft Prefab Category 5 Cable P070-000500 - Local Video Splitter Cable

Additional Information

Additional Information

N/A

ADDERlink X200 Extender for Video, Keyboard, & Pointing Device (up to 1000 ft. at 1280 x 1024 (60 Hz Refresh), up to 650 ft. at 1600 x 1200 (60 Hz Refresh), up to 165 ft. at 1920 x 1200 (60 Hz Refresh) Software Independent. Approved for up to Class I & II, Division 1 & 2, Groups A-G when used with FM Approved D3 Monitor. For use with CRT or Flat Panel Displays. For use with Daisy Data Remote Equipment. Only available with a USB connection. (Option 230 must be included)

Note

Note

N/A

A common sense solution for saving money

Instead of paying for a second computer and another software license to put process control on your plant floor, wouldn't it make more sense to be able to operate one computer from both the control room and the plant floor?

That's exactly the idea behind the Daisy extender system. One computer, two monitors, two keyboards and two pointing devices and the remote peripherals can be up to 1000 feet away!

And it has never been simpler. Control over both keyboard and pointing device is switched to your location JUST BY STARTING TO WORK at that station. You can even configure the system to provide lock-out control of switching locations.

The Daisy 5550 Series an economical solution for plant floor process control.

  • 1 User Configurable